Archive

UDK: 624.011.1:691.11
DOI: n/a

Published: Građevinar 56 (2004) 3
Paper type: Preliminary report
Download article (Croatian): PDF
Download article (English): n/a

Bearing capacity of glued and wound steel bars contained in oak elements

Vlatka Rajčić, Adriana Bjelanović, Mladenko Rak

Abstract

The tensile strength of glued and wound steel bars contained in oak samples, as determined by uniaxial pull-out testing, is presented in the paper. The bearing capacity of such connections depends on the geometry of the connection, but also on the quality of the wood, glue and steel. The parametric model, prepared before the testing based on the finite element method, has proven to be a theoretical confirmation of test results. The analysis shows that the stress distribution corresponds well with individual connection failure mechanisms.

Keywords
wound steel bars, finite element method, gluing, oak wood, tensile strength of connection, pull-out test, parametric model

HOW TO CITE THIS ARTICLE:

Rajčić, V., Bjelanović, A., Rak, M.: Bearing capacity of glued and wound steel bars contained in oak elements, GRAĐEVINAR, 56 (2004) 3

OR:

Rajčić, V., Bjelanović, A., Rak, M. (2004). Bearing capacity of glued and wound steel bars contained in oak elements, GRAĐEVINAR, 56 (3)
Authors:
Rajcic Vlatka WEB
Vlatka Rajčić
University of Zagreb,
Faculty of Civil Engineering
Adriana BjelanoviD WEB
Adriana Bjelanović
University of Rijeka,
Faculty of Civil Engineering

Mladenko Rak
University of Zagreb,
Faculty of Civil Engineering